Complete Flat Rolled Metals Processing and Management Solutions

TMW Warranties

Our Processing Warranties

The Material Works, Ltd. (TMW) warrants that all processed material will meet or exceed quoted specifications for a period of 90 days from date of processing for issues reported within that same time period.

Cut-to-length and blank material is warranted on a stack-by-stack basis only. If a claim is made, the original TMW tag must be available. Mixed stacks or unidentified material will not be accepted. Claims for remaining sheets on stack will not be accepted if top sheet is within quoted tolerance.

Slit coil material is warranted on a coil-by-coil basis only. TMW will only warranty for surface defects based on what is visible on the head or tail of a product coil. If a claim is made, the original TMW tag must be available.

EPS processed material as produced by TMW (whether dry or oil applied) is warranted against rust formation on the coil or sheet surface for 180 days from the date of processing for issues reported with the same period. Acid pickled substrate and sheared/slit edges excluded. EPS DRY material that is not fully paper wrapped is not warranted. EPS processed steel is not warranted against rust resulting from improper handling or storage practices that bring the surface into contact with moisture including rain or temperature change condensation

In the event that TMW and Customer agree that processed material does not meet quoted specifications, TMW shall, at its sole option, either correct the affected material or credit Customer for the actual cost of the affected warranted material. These remedies are Customer’s sole and exclusive remedies.

(a) Correct the material,
(b) Credit customer’s account at cost.

TMW’s liability is limited as herein specified and in no event shall TMW be liable for any other damage whether direct or indirect. TMW’s maximum liability for any claim shall not exceed the actual cost of the affected warranted material.

TMW MAKES NO WARRANTY NOT HEREIN STATED AND EXCLUDES ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Material Defect Plan

At TMW, we strive to make sure no material gets to you or your customers that is out of specification. This is not a problem for length, width, thickness, diagonal and flatness – these specifications are met before we submit your order to production. However, surface irregularities are often not observable until the coil is loaded for processing.

When surface irregularities are observed, we cannot risk processing material that will be rejected, therefore, we ask that a Surface Plan be completed to describe what surface defects are acceptable and what are rejectable. If we do not have a Surface Plan for your order and cannot reach you for a decision, your coil must be rewound. A $186.00 rewind charge and additional setup fee will be issued against your order. To avoid this charge and help us process your order on time, we ask that you complete steps 1 – 3 (see blue box at the right) by the time your coils arrive at TMW.

The Surface Plan describes what defects you can accept and communicates what you want our operators to do. We use the Surface Plan to make decisions as to whether or not to continue processing. If we find the defect is beyond your acceptability standards, we can back off the coil without extra line down time.

We urge you to perform steps 1 – 3 to reduce rewind charges and to allow us to process accurately, to your needs, and on time.

Surface Plan Instructions

It may be difficult to reach you, so please take the following steps, to help resolve defect issues in a timely manner:

  1. Submit a list of what types of defects are acceptable before the order is prepared. These are listed in the form of a Surface Plan.
    Download Sample Surface Plan
  2. You can also give instructions to process the job completely and document the nature of the defect. Please indicate:
    • Process standard lengths if there is a rejectable defect, or
    • Process as per original order and label as non-conforming.
  3. Be sure to supply a phone number(s) where we can reach you immediately.

The Teamwork Credo

TMW focuses on empowering our teammates to set goals and self-supervise. We listen, converse, and develop plans and improvements together. We apply the resources necessary to allow them to achieve those goals. Then we get out of the way. We use a highly incentive-based pay structure. Efficiency is important, but safety and quality come first. All of these aspects of our service to you are part of our compensation package.

We practice open book management. We believe that if all teammates understand how their efforts affect TMW’s financials, they can set better goals and be motivated to work with their teams to achieve those goals. Theirs individually and the for team as a whole.

We strongly believe this reflects in our service to you.

Our Capabilities

Slitting

Cut to Length & Blanking

Stretcher Leveling

EPS Pickling